Power Supply And Start-Up; Battery Powered; Front Panel Keys And Indicators - Scale House ATM Mode D'emploi

3.1 POWER SUPPLY AND START-UP

The indicator can be powered with a fitted 240 Vac external power adapter or just with the fitted battery.
NOTE: it is advisable to completely recharge the battery (12 hours) with the first installation of the instrument.
TO POWER the instrument through the 240 Vac mains put the AC/DC power plug in the appropriate socket under the
scale and the power adapter in the 240 Vac mains socket.
TO TURN ON/TURN OFF the instrument press the ON/OFF key.
After the self-check the scale will show "hi rES" (in case of NOT approved instrument) or "LEGAL" (in case of approved
instrument).

3.2 BATTERY POWERED

The weighing indicator can be operated from the battery if desired.
When the battery needs charging the "LOW BAT" message on the weight display will appear. The battery should be
charged when the message appears. The scale will still operate for about 10 minutes after which it will automatically switch
off to protect the battery.
To charge the battery simply plug into the mains power. The scale does not need to be turned on.
The battery should be charged for 12 hours for full capacity.
You can find the "Charge" LED at the top of display to indicate the status of battery charging. When the scale is plugged
into the mains power the internal battery will be charged. If the LED is green the battery has a full charge. If it is Red
the battery is nearly discharged and yellow indicates the battery is being charged.
As the battery is used it may fail to hold a full charge. If the battery life becomes unacceptable then contact your distributor

4. FRONT PANEL KEYS AND INDICATORS

8