Sealing Access To The Balance Settings - Scale House ATM Mode D'emploi

8. SEALING ACCESS TO THE BALANCE SETTINGS

For legal for trade applications, the balance must be sealed to prevent access to the metrological parameters.
To seal the balance, press the recessed Lock switch at the bottom of the balance, momentarily during power up (the
message "LEGAL" appears an instant), then cover the Lock switch access hole. A cover seal and paper seal may be
installed as shown.
To regain access to the locked balance settings, break the seal and press the recessed Lock switch
momentarily during power up (the message "HIRES" appears an instant).
ATM SEALING
16