Introduction; Main Technical Specifications; Installation - Scale House ASB6 Mode D'emploi Operateur

1. INTRODUCTION

This manual was created to help you install and learn all about the functional possibilities of the ASB scale.
The scales should be sited in a location that will not degrade the accuracy.
Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents.
Avoid unsuitable tables. The tables or floor must be rigid and not vibrate. Do not place near vibrating machinery.
Avoid unstable power sources. Do not use near large users of electricity such as welding equipment or large motors.
Avoid high humidity that might cause condensation. Avoid direct contact with water. Do not spray or immerse the scales in
water.
Avoid air movement such as from fans or opening doors. Do not place near open windows.
Keep the scales clean.
Do not stack material on the scales when they are not in use.

2. MAIN TECHNICAL SPECIFICATIONS

Model
ASB6
ASB15
ASB30
ASBP6
ASBP15
ASBP30
◆
6 Large LCD displays.
◆
Rechargeable battery.
◆
Selectable price unit (kg or hg).
◆ Accumulate operation.
◆
Account function, do memory recall, give change and memory clear one time.
◆
Auto backlight.

3. INSTALLATION

a) Unpack then product.
b) Level the platform by adjusting the adjustable feet until the bubble under the plate is in the centre of the level. The
stability of the platform is very important.
ALL THE CORNERS MUST REST IN A UNIFORM WAY. Carefully check that all feet fully rest on the ground and that the
platform, loaded on the corner, is not unstable (if a corner is not resting on the ground its relative foot is easier to turn).
Plate
(dimensions in mm)
230x300
230x300
230x300
230x300
230x300
230x300
WARNINGS
Capacity kg
3/6
6/15
15/30
3/6
6/15
15/30
4
Division g
1/2
2/5
5/10
1/2
2/5
5/10