Auto Power Off; Set-Up Environment; Set-Up Environment Block Diagram - Scale House ASB6 Mode D'emploi Operateur

6.12 AUTO POWER OFF

The scale have auto shut off function, you can set this parameter.
Press ACCOUNT key during self-checking, display shows "sleep mode", press SAVE key to select 0/1/5/30 (not use
auto power off / turn off power after scale leisure for 1 minutes / turn off power after scale leisure for 5 minutes / turn
off power after scale leisure for 30 minutes), press TARE key to sure.

7. SET-UP ENVIRONMENT

The scale has various parameters that can be configured in the SET-UP environment.
To enter in the SET-UP environment press during the start-up the TARE key during the countdown.
One is asked to enter the password. The default password is 0000.
- Enter the password and press the TARE key:
- The second display will show the first function, "F0":
- Pressing the SAVE will cycle through the other functions.
- Pressing TARE will allow you to set the function.
- Use SAVE or set a value using the numeric keys,
- Press TARE key to enter the value or use the ZERO key to leave a parameter unchanged or to escape set-up
environment.

SET-UP ENVIRONMENT BLOCK DIAGRAM

SETUP
ENVIRONMENT
F0 CAL
F1 rES
F2 Unit
F3 CAPA
F4 Point
F5 Point
F6 init ZEro
F7 rE ZEro
F8 SCSIUE
Pin
TARE
F9 A-D
COUNTS
F10 SPEED
F11 BAUD
F12 Min Coin
F13 SEriES
F14 Point
F15 LAnG
F16 GrU
F17 rESEt
1 3000,
1 6000,
dUaL rAnGE
kiLoS, 100
3, 6, 15, 30
0, 1, 2, 3, 4
0, 1, 2
0 ... 20
0 ... 20
On, oFF
7.5, 15, 30, 60
2400, 4800,
9600, 19200
1, 2, 5, 10
On, oFF
FiXED, FLoAt
En, it, ES,
Fr, DE
9,XXXXX
9
XXX