Printer Connection; Error Messages; Recycling Instruction - Scale House ASB6 Mode D'emploi Operateur

8.2 PRINTER CONNECTION

STANDARD
TPR
GND Black
CTS Yellow
RX Grey
TPR printer power supply
+VP and +VC Red and Orange
GND and GND Black and Black

9. ERROR MESSAGES

ERROR MESSAGES
- - oL - -
Err 4
Err 5
Err 6

RECYCLING INSTRUCTION

The crossed-out wheeled bin on the product means that at the product end of life, it must be taken to
separate collection or to the reseller when a new equivalent type of equipment is purchased. The
adequate differentiated refuse collection in having the product recycled, helps to avoid possible
negative effects on the environment and health and supports the recycling of the materials of which
the equipment is made. The unlawful disposal of the product by the user will entail fines foreseen by
the current regulations.
CABLE (9 Pin connector)
5
-
3
STANDARD
POWER SUPPLY
CABLE
+V (5V / 5A)
- V
DESCRIPTION
Over range
Zero Setting Error
Keyboard error
Input signal greater
than 3mV/V
ASB
RESOLUTION
Remove weight from the scale.
Upon start-up or when the ZERO key is pressed, the weight on the
scale exceeds the percentage programmed on the max. capacity.
Remove the excess weight and retry.
The keyboard could be damaged.
Indicates that the A/D converter value is greater than the maximum
value:
- Remove the weight from the scale if it's exceeding.
- The load cell or the electronics could be damaged.
13