digits of the gravitational acceleration.
In case one enters a wrong g value: the minimum decimal value is suggested (9,75001); a wrong value is any decimal
number that is not between 9,75001 and 9,84999 (inclusive).
"F17" - RESET (*)
For use of the manufacturer.
8. SERIAL OUTPUT
Specifications
RS-232 output for the transmission of the weight data
ASCII code
Baud selectable from 2400 - 19200
data bits 8 – n – 1
Connector:
9 pin
Pin 2:
RECEPTION
Pin 3:
TRANSMISSION
Pin 5:
GND
8.1 OUTPUT DATA FORMAT
In the normal weighing operations when one is accumulating the weight (see section 6.9) the data format is the following:
When the totals are recalled from the storage (see section 6.10) the data format is the following:
Progressive of totalisations
Progressive of totalisations
12