Motorola CLK446 Mode D'emploi page 25

The radio does not automatically exit Scan mode after
the Menu timer expires. To exit Scan mode, press the
PTT button.
To pause Scan and return to the menu, press the
MENU button.
Nuisance Channel Delete
Nuisance Channel Delete allows you to temporarily
remove channels from the Scan List. This feature is
useful when irrelevant conversations on a 'nuisance'
channel ties up the radio's scanning feature.
To delete a channel from the Scan List:
• Start Scan mode by pressing the MENU button
then, navigate to the Scan feature and enable
scan by using the Volume Control Button (+/–).
• Wait until the radio stops receiving at the channel
you wish to eliminate. Long press the MON
button to delete the channel.
The channel will not be scanned again until you exit
the Scan mode by short pressing the PTT button or by
turning OFF the radio and back ON.
Setting Squelch Levels
You can adjust the squelch level of the radio to filter
out unwanted calls with low signal strength or
channels that have a higher than normal background
noise.
Press the MENU button until the Squelch icon
appears. To select squelch level, press the Volume
Control Button (+/–).
There are three squelch levels and the default squelch
level is Level 2. The levels are indicated by the
following icons:
Level 1
Level 2
Level 3
To save squelch level and exit Menu, press the PTT
button.
23
English