Keysight Technologies U1273A Guide De L'utilisateur page 52

1 Introduction
Cleaning Your Multimeter
To avoid electrical shock or damage to the multimeter, ensure that the
WARNING
insides of the casing stay dry at all times.
Dirt or moisture in the terminals can distort readings. Follow the steps below to
clean your multimeter.
1 Turn the multimeter off, and remove the test leads.
2 Turn the multimeter over, and shake out any dirt that may have accumulated
Clean the case with a soft, lint-free, slightly dampened cloth. Do not use
detergent, volatile liquids, or chemical solvents.
52
in the terminals.
Keysight U1273A/U1273AX User's Guide