Publicité
Les langues disponibles
Les langues disponibles
You can enable Smooth by holding
("Power-on options"
Smooth will be turned off when you cycle the multimeter's power. You can
permanently enable Smooth from the setup menu.
Parameter
SMOOTH
To change the smooth refresh rate:
1 Press
2 Browse to Menu 5 > SMOOTH, and press
3 Use the arrow keys to change the smooth refresh rate. Select E to enable the
4 Press
5 Press and hold
Resetting the multimeter's setup options
The multimeter's setup options can be reset to its default values through the
setup menu.
Parameter
DEFAULT
1 Press
2 Browse to Menu 6 > DEFAULT, and press
3 Use the arrow keys to select YES.
Keysight U1273A/U1273AX User's Guide
on page 32). This method, however, is temporary and
Range
– 0001 to 9999
– D(isabled) or E(nabled)
for more than 1 second to enter the multimeter's setup menu.
Setup
Smooth feature.
to save your changes (or press
until the multimeter restarts to return to normal operation.
Setup
Range
YES or NO
for more than 1 second to enter the multimeter's setup menu.
Setup
Multimeter Setup Options
while turning on the multimeter
Defaul t setting
0009-D(isabled)
edit the value.
to discard your changes).
Defaul t setting
NO
edit the value.
4
145
Publicité
