Publicité
Les langues disponibles
Les langues disponibles
Changing the thermocouple type
This setting is used with temperature measurements (see
thermocouple type that matches the thermocouple sensor you are using for
temperature measurements.
Parameter
T-TYPE
To change the thermocouple type:
1 Press
2 Browse to Menu 2 > T-TYPE, and press
3 Use the arrow keys to change the thermocouple type.
4 Press
5 Press and hold
Changing the temperature unit
This setup item is locked for certain regions. Always set the temperature unit
CAUTION
display per the official requirements and in compliance with the National
laws of your region.
This setting is used with temperature measurements (see
combinations of displayed temperature unit(s) are available:
– Celsius only: Temperature measured in °C.
– Fahrenheit/Celsius: During temperature measurements, press
– Celsius/Fahrenheit: During temperature measurements, press
– Fahrenheit only: Temperature measured in °F.
Press and hold
Keysight U1273A/U1273AX User's Guide
Range
Type-J or Type-K
for more than 1 second to enter the multimeter's setup menu.
Setup
to save your changes (or press
until the multimeter restarts to return to normal operation.
Setup
between °F and °C.
between °C and °F.
for more than 1 second to unlock this setting.
Multimeter Setup Options
page
87). Select a
Defaul t setting
K
edit the value.
to discard your changes).
page
87). Four
4
to switch
to switch
135
Publicité
