Keysight Technologies U1273A Guide De L'utilisateur page 115

Recording Measurement Data (Data Logging)
The Data Logging function provides you the convenience of recording test data for
future review or analysis. Since data is stored in the nonvolatile memory, the data
remains saved even when the multimeter is turned OFF or if the battery is
replaced.
The Data Logging feature collects measurement information over a user-specified
duration. There are three data logging options that can be used to capture
measurement data: manual (HAND), interval (AUTO), or event (TRIG).
– A manual log stores an instance of the measured signal each time
– An interval log stores a record of the measured signal at a user-specified
– An event log stores a record of the measured signal each time a trigger
Table 3-2 Data logging maximum capacity
Data logging option
Manual (HAND)
Interval (AUTO)
Event (TRIG)
Before starting a recording session, set up the multimeter for the measurements
to be recorded.
To change the data logging option see
page 132 for more information.
Keysight U1273A/U1273AX User's Guide
pressed. See page 116.
interval. See page 116.
condition is satisfied. See page 118.
Maximum capacity for saving
Shares the same memory with Interval logging
"Changing the recording option"
Multimeter Features
100
10000
on
3
is
115