Publicité
Les langues disponibles
Les langues disponibles
4
Multimeter Setup Options
Table 4-2
Setup menu item descriptions (continued)
Menu
Legend
BAUD
DATA BIT
MENU 4
PARITY
ECHO
PRINT
REVISION
S/N
V-ALERT
MENU 5
USER SCALE
SMOOTH
130
Available settings
Description
Set the baud rate for remote communication
with a PC (9600 or 19200).
9600 or 19200
Default is 9600.
Set the data bit length for remote
communication with a PC (7-bit or 8-bit).
7 or 8
Default is 8-bit.
Set the parity bit for remote communication
with a PC (none, even, or odd).
NONE, EVEN, or ODD
Default is none.
Set the multimeter to echoes (returns) all the
characters it receives.
OFF or ON
Default is disabled (off).
Set the multimeter to print out the measured
data when the measuring cycle is completed.
OFF or ON
Default is disabled (off).
-
Displays the multimeter's firmware revision.
Displays the multimeter's serial number (for the
-
last eight digits).
Set the multimeter's voltage alert value from
0.01 V to 999.99 V. You can also disable this
000.01 V to 999.99 V
feature (D).
(D or E)
Default is disabled (030.00-D).
Set the scale conversion value from (0000.1) to
(1000.0). The scale conversion unit can be set
0000.1 V to 1000.0 V
to V/V, A/V, or (no unit)/V.
Default is (1000.0) V/V.
Set the primary display's settling value from
0001 to 9999. You can also disable this
0001 to 9999
feature (D).
(D or E)
Default is disabled (0009-D).
Keysight U1273A/U1273AX User's Guide
Learn more on:
page 30
and
page 141
page 30
and
page 141
page 30
and
page 142
page 30
and
page 142
page 30
and
page 143
-
-
page 28
and
page 143
page 108
and
page 144
page 32
and
page 144
Publicité
