Optional Tools And Accessories; Noise And Vibration Level; Warranty - Virutex FC116U Mode D'emploi

21. OPTIONAL TOOLS AND ACCESSORIES

• Bits available for the FC16S mortising trimmer:
NUMBER
1640127
1640150
1640128
1640367
1640129
1640130
1640368
1640131
1640369
1640132
1640140
• The extension tool UP16I, 1645287 allows the machine to be
held in place beyond the door itself.

22. NOISE AND VIBRATION LEVEL

The noise and vibration levels of this device have been mea-
sured in accordance with European standard EN 61029-1 and
serve as a basis for comparison with other machines with similar
applications.
The indicated vibration level has been determined for the
device's main applications and may be used as an initial value for
evaluating the risk presented by exposure to vibrations. Howe-
ver, vibrations may reach levels that are quite different from the
declared value under other application conditions, with other
tools or with insufficient maintenance of the electrical device or
its accessories, reaching a much higher value as a result of the
work cycle or the manner in which the electrical device is used.
Therefore, it is necessary to establish safety measures to protect
the user from the effects of vibrations, such as maintaining both
the device and its tools in perfect condition and organising the
duration of work cycles (such as operating times when the ma-
chine is subjected to loads, and operating times when working
with no-load, in effect, not in use, as reducing the latter may
have a considerable effect upon the overall exposure value).

23. WARRANTY

All VIRUTEX power tools are guaranteed for 12 months fromthe
date of purchase, excluding any damage which is a result of
incorrect use or of natural wear and tear on the machine. All
repairs should be carried out by the official VIRUTEX technical
assistance service.
VIRUTEX reserves the right to modify its products without prior
notice.
EXT. DIAM. HEIGHT
16 mm. 13.5 mm.
17 " 13.5 "
18 " 13.5 "
20 " 13.5 "
21 " 13.5 "
23 " 13.5 "
23.5 " 13.5 "
25 " 13.5 "
29 " 13.5 "
30 " 13.5 "
Drilling bit Ø 24
FC116U / Operating instructions - 31