Replacing The Filter Cartridges En; Emptying The Dust Collecting Drawer En - Abicor Binzel xFUME VAC ADVANCED Mode D'emploi

9 Maintenance and cleaning
9.4 Replacing the filter cartridges
3)
Fig. 8 Replacing the filter cartridges
1 Turn off the extraction system by setting the Device On/Off switch (4) to "Off" (Fig. 5).
2 Pull out the mains plug (no Fig.).
3 Loosen the lower clamps and remove the housing.
4 Unscrew the filter cartridges and replace with new ones.
5 Dispose of the dust collecting bag in accordance with local regulations (no Fig.).
 12 Disposal on page EN- 21
6 Reverse the steps above to reassemble the system (no Fig.).
9.5 Emptying the dust collecting drawer
1
4
1 Extraction system
Fig. 9 Emptying the dust collecting drawer
1 Turn off the extraction system by setting the Device On/Off switch (4) to "Off" (Fig. 5).
2 Pull out the mains plug.
3 Loosen the screws (3) and pull out the dust collecting drawer (2).
4 Empty the dust collecting drawer (2).
5 Dispose of the dust collecting bag in accordance with local regulations (no Fig.).
 12 Disposal on page EN- 21
6 Reverse the steps above to reassemble the system.
EN - 18
4)
2 Dust collecting drawer
xFUME VAC ADVANCED
2
3 2 screws
BAL.0731.0 • 2019-09-18