Putting Out Of Operation - Abicor Binzel xFUME VAC ADVANCED Mode D'emploi

xFUME VAC ADVANCED
7.1 Control elements/ports
10
9
8
7
1 Service LED
2 Power LED
3 Auto/Manual switch
Fig. 5 Control elements/ports

8 Putting out of operation

 Fig. 5 Control elements/ports on page EN- 15
1 Use the Device On/Off switch (4) on the control panel to switch off the extraction system.
2 Disconnect the extraction system from the power supply.
3 Disconnect the compressed air supply and, if applicable, the current clamp.
BAL.0731.0 • 2019-09-18
4 Device On/Off 7
5 Fuse 8
6 Power cable 9
8 Putting out of operation
1
2
3
4
5
6
Hour meter 10 Current clamp port 2
Compressed air connector
Current clamp port 1
EN - 15