Confi gure motor M1
Modify certain parameters previously described for motor M1 only (where diff erent from M2).
The function appears only with M1+M2 selected in [Function Number of Motors].
Confi guration>
Motor settings>
Confi gure motor M1
Confi gure motor M2
Modify certain parameters previously described for motor M2 only (where diff erent from M1).
The function appears only with M1+M2 selected in [Function Number of Motors].
Confi guration>
Motor settings>
Confi gure motor M2
Opening speed
Set the opening speed for both motors (percentage of maximum speed).
If the value set for M1 is diff erent to the value set for M2, only the value for M2 is shown here.
Confi guration>
Gate travel settings
Closing speed
Set the closing speed for both motors (percentage of maximum speed).
If the value set for M1 is diff erent to the value set for M2, only the value for M2 is shown here.
Confi guration>
Gate travel settings
Motor type
Encoder
Limit-switch function
Input type FC/FA
Motor power
Motor type
Encoder
Limit-switch function
Input type FC/FA
Motor power
Opening speed
Closing speed
See the specifi c parameters for each function.
See the specifi c parameters for each function.
40% to 100% (Default 70%)
40% to 100% (Default 70%)