CAME ZLX24SA Mode D'emploi page 88

Functions menu
Number of motors
Set the number of motors that control the gate.
Confi guration>
Motor settings
Motor type
Set the type of gearmotor installed on M1 and M2.
If the value set for M1 is diff erent to the value set for M2, only the value for M2 is shown here.
Confi guration>
Motor settings
Encoder
Use the encoder input from the motor.
The parameter is only available for motors that have an encoder.
If the value set for M1 is diff erent to the value set for M2, only the value for M2 is shown here.
Confi guration>
Motor settings
Reduce speed
Reduce the minimum voltage applicable to the motor.
The parameter is only available for the Stylo ME and Stylo RME motors.
Confi guration>
Motor settings
Number of motors
Motor type
Encoder
Reduce speed
M1+M2 (Default)
M2
Generic
STYLO-ME
STYLO-RME
FTX
FAST-70
AXI
AMICO
FERNI
FERNI-V
AXO
A3024N/A5024N
FROG-A24
FROG-A24E (Default)
ATS
F1024
F4024E
F4024EP
Activated (Default)
Off
Deactivated (Default)
1% to 50%