CAME ZLX24SA Mode D'emploi page 80

PROGRAMMING
Programming button functions
Outside the menu, the ESC key stops the gate and the < > keys open and close the gate.
When executing a manoeuvre, press and hold the ENTER button to display the Opening, Partial Opening, Closing
and Stop commands. You can select the desired command using the <> buttons.
1
ESC button
The ESC button is used to perform the operations described below.
Exit the menu
Delete the changes
Go back to the previous screen
Stop the operator
2
< > buttons
The <> buttons are used to perform the operations described below.
Navigate the menu
Increase or decrease values
3
ENTER button
The ENTER button is used to perform the operations described below.
Access menus
Confi rm choice