CAME ZLX24SA Mode D'emploi page 102

New user
Register up to a maximum of 1000 users and assign a function to each one.
The operation can be carried out by using a transmitter or a BUS selector device (e.g. a keypad or transponder
reader). The board that manages the transmitters (AF) must be inserted into the connector.
Manage users
Remove user
Remove one of the registered users.
Manage users
Remove all
Remove all registered users.
Manage users
Radio decoding
Choose the type of radio coding for the transmitters enabled to control the operator.
If you choose the type of radio coding for the transmitters [Rolling code] or [TW key block], any transmitters
saved previously will be deleted.
Manage users
New user
Remove user
Remove all
Radio decoding
Choose the function to be assigned to the user.
Step-by-step
Sequential
Open
Partial opening
B1-B2 output
Press ENTER to confi rm.
You will be asked to enter your user code. Send the code
from the control device.
Repeat the procedure to add other users.
Use the arrows to choose the number associated with the
user you want to remove.
Alternatively, you can select a user by sending a
command from the associated device.
Press ENTER to confi rm
Confi rm? NO
Confi rm? YES
Confi rm? NO
Confi rm? YES
All decoding (Default)
Rolling code
TW Key block
Confi rm? NO
Confi rm? YES