Playing A Source - Pioneer VSX-C302 Mode D'emploi

Getting started

Playing a source

Here are the basic instructions for playing a source (such
as a DVD disc) with your home theater system.
RECEIVER
SIGNAL SEL
DVD
STANDBY/ON
DIGITAL DTS AUTO
2
FRONT INPUT
DIGITAL IN
VIDEO L AUDIO R
PHONES
1 Turn on the power of the playback component
(for example a DVD player), your TV and subwoofer
(if you have one).
• If your source is the TV's built-in tuner, then switch to
the channel you want to watch, otherwise make sure
that the TV's video input is set to this receiver. (For
example, if you connected this receiver to the VIDEO
1 jacks on your TV, make sure that VIDEO 1 input is
now selected.)
2 If the receiver isn't already on, press
RECEIVER to switch it on.
3 Change the receiver input to the source you
want to play.
You can use the front panel INPUT SELECTOR knob or
the INPUT button on the remote.
4 Start playback of the DVD (or other component).
If you're playing a Dolby Digital or DTS surround sound
DVD disc, you should hear surround sound. If you are
playing a stereo source, you will only hear sound from the
front left/right speakers in the default listening mode.
• See also Home theater sound on page 26 for more
information on different ways of listening to sources.
5 Use MASTER VOLUME (front panel or remote) to
adjust the volume level.
• Turn down the volume of your TV so that all the sound
is coming from the speakers connected to this
receiver.
TV/SAT DVR/VCR
FRONT FM/AM
MASTER
VOLUME
RECEIVER
VSX-C302
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
MASTER
STEREO PRO LOGICII ADVANCED PHONES SOUND MODE INPUT SELECTOR
2 VOLUME
R
DOWN UP
Note
• If you need to change the input signal type from
digital to analog, press SIGNAL SEL (see also
Selecting the input signal type on page 30).
• For more detailed surround sound setup, see The
System Setup menu on page 32.
05
25
En