Sr+ Control For Pioneer Plasma Displays; Using The Sr+ Mode With A Pioneer Plasma Display - Pioneer VSX-C302 Mode D'emploi

09 The System Setup menu

SR+ control for Pioneer plasma displays

Make the following settings if you have connected a
Pioneer plasma display to this receiver using an SR+
cable. Note that the number of function settings available
will depend on the plasma display you've connected.
See also Using this receiver with a Pioneer plasma display
on page 18 and Using the SR+ mode with a Pioneer
plasma display below.
Volume control setting
• VOL C OFF – The receiver does not control the
volume of the plasma display.
• VOL C ON – When the receiver is switched to one of
the inputs that use the plasma display (DVD, or
another one of functions listed below), the volume on
the plasma display is muted so only sound from the
receiver is heard.
Function setting for DVD input
• DVD:1 – DVD:5 or TV – Matches the DVD function of
the receiver with a numbered video input on the
plasma display. For example, DVD:3 matches the
DVD input with video input 3 on the plasma display.
Function setting for TV input
• TV:1 – TV:5 or TV – Matches the TV/SAT function of
the receiver with a numbered video input on the
plasma display. For example, TV:TV matches the TV/
SAT input with TV on the plasma display.
Function setting for DVR/VCR input
• DVR:1 – DVR:5 or TV – Matches the DVR/VCR
function of the receiver with a numbered video input
on the plasma display. For example, DVR:2 matches
the DVR/VCR input with video input 2 on the plasma
display.
Function setting for FRONT input
• FRONT:1 – FRONT:5 or TV – Matches the
function of the receiver with a numbered video input
on the plasma display. For example, FRONT:4
matches the
plasma display.
34
En
FRONT
input with video input 4 on the
Using the SR+ mode with a Pioneer plasma
display
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer plasma display even easier. These
features include:
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
(When VOL C ON is selected.)
See also Using this receiver with a Pioneer plasma display
on page 18 for connecting up, and SR+ control for
Pioneer plasma displays above for setting up the receiver.
1 Make sure that the plasma display and this
receiver are switched on and that they are
connected with the SR+ cable.
See Using this receiver with a Pioneer plasma display on
page 18 for more on connecting these components.
2 To switch SR+ mode on/off, press the SR+ button
on the remote control.
Note
• The SR+ setting remains in effect even if the power is
switched off.
• The automatic volume muting feature is enabled
separately; see SR+ control for Pioneer plasma
displays above.
FRONT