Vcr / Dvd / Ld Player And Dvd Recorder Controls - Pioneer VSX-C302 Mode D'emploi

10 Controlling other equipment

VCR / DVD / LD player and DVD recorder controls

This remote control can control these components after
entering the proper codes (see Using the remote control
with other components on page 36).
Button(s)
SOURCE
ENTER/TIMER REC
+10 •/CLEAR
Number buttons
REC ì &
DISC NAVIGATOR
MENU
RETURN
AUDIO
, ENTER
CHANNEL +/–
38
En
Function
Press to switch the components between standby and on.
Press to return to the start of the current track or chapter.
Press to advance to the next track or chapter. Repeated presses skips
to the start of the following tracks or chapters.
Press to pause playback or recording.
Hold down for fast-forward playback.
Hold down for fast-reverse playback.
Press to start playback.
Press to stop playback (on some models, pressing this when the disc
is already stopped will cause the disc tray to open).
Use as ENTER.
Press after keying a channel number.
Press to display timer recording screen.
Press to switch side of a disc.
Use as +10 button when entering numbers.
Press to clear a numeric entry.
Use to directly access tracks, etc. on a program source
Method 1: For numbers 1–9, use the number buttons. For numbers 10
and over, use the +10 button, e.g., +10, +10, 3 for 23.
Method 2: Use the number buttons followed by ENTER, e.g., 2, 3,
ENTER for 23.
Press together to start recording.
Press to display top menu.
Press to display Disc Navigator screen.
Press to display on-screen menu.
Press to go back to the previous menu page.
Press to change the audio track of discs with more than one audio
track.
Press to change TV/VCR.
Use to navigate on-screen menus.
Use to select channels.
Components
All
All
All
All
All
All
All
All
DVD
VCR
DVD recorder (PIONEER DVR-520H, 320)
LD
LD
DVD / DVD recorder
All
VCR
DVD / LD
DVD recorder (PIONEER DVR-520H, 320)
All
DVD / DVD recorder
DVD / LD / DVD recorder
VCR
All
LD / VCR / DVD recorder