Remote Control - Pioneer VSX-C302 Mode D'emploi

04 Controls and displays

Remote control

Function names printed in green on the remote control
are receiver-related functions. Function names printed in
blue are for the built-in tuner (see Using the tuner on
page 28). Other functions relate to other equipment that
you can control using this remote. See also Controlling
other equipment on page 36.
1
3
5
7
8
9
10
12
13
15
16
18
19
20
1 RECEIVER
Press to put the remote in 'receiver' mode (i.e., the
remote controls the receiver functions).
2 LED
Indicates a remote control operation.
3 RECEIVER
Press to switch the receiver on or into standby.
4 SOURCE (page 36)
Press to switch the current source component on or into
standby.
22
En
RECEIVER
RECEIVER
SIGNAL SEL
DVD TV/SAT DVR/VCR
SR+
FRONT FM/AM
REC STOP REC HDD DVD
ADVANCED
AUTO STEREO SURROUND
SURROUND
SOUND VIRTUAL
MODE DIALOG SB
11
MUTE
MASTER
VOLUME
DISC NAVIGATOR SYSTEM SETUP
ROOM SETUP
14
TUNE
DTV MENU
T.EDIT
ST ST
ENTER
AUDIO RETURN
TUNE
17
CH SELECT TEST TONE
DTV GUIDE ANT BAND DTV INFO
DISPLAY CLASS MPX D.ACCESS
TIMER REC
ENTER
CLEAR
+10
21
TV CONTROL SLEEP
22
INPUT CHANNEL VOLUME CHANNEL
DIMMER
23
RECEIVER
5 SIGNAL SEL (page 30)
Use to select the analog (ANA) or digital (DIG)signal for
the DVD, TV/SAT, DVR/VCR and FRONT inputs.
6 Input/remote control mode select buttons
(page 25)
When the Remote Direct function is set to on, these
buttons (except FM/AM) change the remote mode and
the receiver input simultaneously. When set to off, they
only switch the remote mode.
2
DVD
4
Press to select DVD as the current input.
TV/SAT
6
Press to select TV/SAT (sattellite tuner) as the
current input.
DVR/VCR
Press to select DVR/VCR as the current input.
FRONT
Press to select FRONT (the front panel audio/video
inputs) as the current input.
FM/AM
Press to select FM/AM (the built-in tuner) as the
current input.
7 SR+ (page 34)
Switches the SR+ mode on/off.
8 DVD recorder control buttons
When set up, these buttons can be used to control a
Pioneer DVD recorder.
REC ì
Press to start recording.
STOP REC
Press to stop recording.
HDD
Press to switch the recorder to HDD playback/
recording.
DVD
Press to switch the recorder to DVD playback/
recording.
9 Sound buttons (page 26)
AUTO
Press to select the AUTO (default) sound for the
current source (stereo, Dolby Digital, DTS, etc.) and
switch off all other sound processing.
STEREO
Press to hear the current source in stereo.
SURROUND
Use to select a SURROUND mode for the current
source.