Controls And Displays; Front Panel - Pioneer VSX-C302 Mode D'emploi

04

Controls and displays

Chapter 4
Controls and displays

Front panel

1 2
1 PHONES jack
When headphones are connected there is no sound
output from the speakers.
2 STANDBY/ON button
Press to switch the receiver on or into standby.
3 FRONT INPUT jacks (page 15)
Use to connect an audio/video component.
4 Digital surround format indicators
2 DIGITAL indicator
Lights when the current source is Dolby Digital.
DTS indicator
Lights when the current source is DTS.
5 AUTO indicator (page 26)
Lights when Auto audio format decoding is selected.
6 Listening mode indicators
STEREO indicator (page 26)
Lights when the source is stereo and/or the listening
mode has been set to STEREO.
2 PRO LOGIC II indicator (page 26)
Lights when one of the Dolby Pro Logic II surround
modes is active with a 2 channel (stereo) source.
ADVANCED indicator (page 27)
Lights when one of the Advanced Surround modes is
active.
PHONES indicator (page 26)
Lights when phones surround mode is active.
SOUND MODE indicator (page 27)
Lights when one of the Sound Modes is active.
7 Remote control sensor
8 INPUT SELECTOR knob (page 25)
Turn to cycle through the various inputs. The current
input is shown in the front panel display.
20
En
3
STANDBY/ON
2 DIGITAL
FRONT INPUT
DIGITAL IN
VIDEO L AUDIO R
PHONES
4 5 6
DTS AUTO STEREO 2 PRO LOGICII ADVANCED PHONES SOUND MODE
9 MASTER VOLUME knob
Use to adjust the volume.
7 8
VSX-C302
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
MASTER
INPUT SELECTOR VOLUME
R
DOWN UP
9