Technical Specifications - EYENIMAL Classic Dog Fence Guide D'utilisation

● Maintenance
 Avoid cleaning the collar with volatile liquids such as solvents or cleaning fluids. Use a soft cloth and neutral detergent.
 The strap can be washed with soapy water.
 In order to maintain water tightness, we recommend the replacement of the seal located in the receiver collar every year.
● Troubleshooting
 Should your pet fencing system develop a fault, first read this guide over, then check the collar battery and replace it if necessary. Also
check that you are using the product correctly.
 Check the fit and tightness of the collar on your dog's neck. Make sure the contact points are in contact with the animal's skin. If
necessary, replace the short contact points by the long ones.
 Make sure the contact points are correctly tightened on the collar.
 Check the wire connection to the transmitter.
 Check the transmitter power supply.
 Check that the On/Off switch is in the "On" position (green indicator light on).
 If you encounter any problem of detection distances, check the condition of the wire and of the connections (oxidation, nick in the wire).
 Reinitialize the collar by removing the battery. Wait a few minutes and then put the battery back in place, making sure to follow polarity
indicated in its housing. Carry out a check as described in the § How to check that your pet fencing system is functioning properly.
If the problem persists, contact your distributor or check out on www.numaxes.com.
You can also contact our Customer Centre by email sales@numaxes.com.
Depending on the extent of the malfunction, you may have to return your product for service and repair.
For all repairs please supply the following:
 the complete product
 the proof of purchase (invoice or sales receipt)
If you omit one of these items, the after sales service will have to invoice you for any repair costs incurred.
● Technical specifications
Power
Tightness
Temperature limitations
Dimensions
Power
Battery life
Tightness
Levels of and static corrections
Temperature limitations
Dimensions
Weight (battery included)
120 V
Shower proof
Between – 0°F and + 100°F
4.60In x 4.33 x 1.10
1 lithium 3 Volts CR2 battery
6 months in stand-by (approx.) / battery power indicator
Waterproof
8
Between -0°F and +100°F
2 In x 1.53 In x 1.22 In
2 oz (without strap)
Collar adjustable to neck sizes from 6,70 In to 21,60 In
- 9 -
Transmitter
Receiver collar