Product Contents; Technical Features - EYENIMAL PROFESSIONAL PET CLIPPER Guide D'utilisation

Product contents

Professional AC pet clipper with 1 extra blade, 4 comb attachments, 1 empty bottle, 1 cleaning brush.

Technical features

Dimensions:
Weight:
Electric power:
2 levels of rotation speed:
Operation instructions
1. Connect the AC adapter to an electrical outlet.
2. Switch the appliance on using the on/off switch.
3. After use, switch the appliance off and unplug the AC adapter from the electrical outlet.
2-Speed feature
The appliance has two different speed settings. The speed can be selected via the on/off switch.
Setting I = low speed
Setting II = high speed
Use low speed for most cutting needs. Use the high speed setting to cut through heavy coats.
Cutting with the comb attachments
The Professional Pet Clipper can also be operated with the included comb attachments. Comb
attachments extend the cutting length range.
To attach your chosen comb, place it onto the bottom edge of the blade set and push it over the
cutting edge of the bottom blade until it locks into place.
To remove the comb attachment, push it towards the cutting edge of the bottom blade and remove it
from the blade set.
Changing the blade set
1. Switch the appliance off.
2. Press the release button towards the blade set (Diagram 1).
3. While holding down the blade release mechanism, push down on the blade, then gently pull
the blade forward, and slide it off the blade hinge (Diagram 2).
4. Ensure that the blade hinge is folded out. If this is not the case, you can fold out the blade
hinge carefully with a flat screwdriver (Diagram 3).
EN - User's guide
19.3 x 4.9 cm
580 g
55W
2000RPM and 3200RPM
7