Troubleshooting - EINHELL BG-PT 3043 SE Mode D'emploi

Anleitung_BG_PT_3043_SE_SPK1__ 27.03.13 08:11 Seite 25

9. Troubleshooting

Fault
The machine does not start.
The machine starts but does not
develop its full output.
The engine does not run smoothly
Engine smokes excessively
Possible cause
Correct starting procedure not
followed.
Sooted or damp spark plug.
Incorrect carburetor setting.
Incorrect choke lever setting.
Soiled air filter.
Incorrect carburetor setting.
Incorrect electrode gap on the
spark plug.
Incorrect carburetor setting.
Incorrect fuel mix.
Incorrect carburetor setting.
Troubleshooting
Follow the instructions for starting.
Clean the spark plug or replace it
with a new one.
Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
Set choke lever to
Clean the air filter.
Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
Clean the spark plug and adjust
the electrode gap or fit a new spark
plug.
Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
Use the correct fuel mix (see fuel
mixing table).
Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
GB
25