Renfert EASY view 3D Mode D'emploi page 33

3.3 Standard Delivery
1 EASY view 3D head with power supply
unit and power cord
1 Support arm with cable and base with
universal clamp
1 Monitor with power supply unit and power cord
1 3D glasses
3.4 Accessories
2200 0420 Stand with screw clamp
2200 0410 Stand with universal clamp
2400 0501 EASY view 3D Converter 3D/2D
2400 0502 EASY view 3D HDMI-Video-Recorder
2400 0503 EASY view 3D HDMI-Splitter
2400 0504 EASY view 3D HDMI-Video-Recorder
with multi voltage power adapter
2400 0505 EASY view 3D HDMI-Splitter with
multi voltage power adapter
4 Commissioning
4.1 Unpacking
⇒ Remove the device and accessories from the shipping box�
⇒ Check the delivery for completeness (compare with the scope of delivery)�
4.2 Mounting the monitor stand
⇒ Place a soft pad on a flat surface.
⇒ Place the monitor with the screen on it�
⇒ Remove the protective film from the stand.
⇒ Attach the supplied stand to the monitor support�
4.3 Setup
Select a workspace with sufficient lighting for the installation of the
EASY view 3D system� If neon lighting is used, it may be neces-
sary to reduce the lighting. Reflections of extraneous light on the
object may result in interference�
⇒ Place the desk pad (12, Fig� 1) on the work table�
The surface structure and color of the desk pad have been selected to reduce irritation to the eye,
which could occur with a surface with structure.
4.3.1 Mounting the support arm
The support arm should preferably be mounted on the back or side of the
table top, at least 400 mm away from the front edge.
This makes it possible to optimally utilize the entire swiveling range of the
support arm.
⇒ Mount the base with the universal clamp on the back or side of the work table
(Fig� 4)�
The universal clamp is suitable for tables with a slab thickness of 18 - 74 mm�
Refer to Chapter 3�4 for more mounting options�
⇒ Insert the support arm (2) into the base� Make sure that the red plastic disc (30)
is placed between the base and the support arm�
The power supply cable for the head is integrated into the support arm, the
cables for the mouse, foot switch and monitor have already been guided
through the cable channel on the back of the support arm.
1 USB memory stick
1 Mouse
1 Foot switch
1 Desk pad
1 Quick Start Guide
2400 0506 EASY view 3D Converter 3D/2D
2400 2101 EASYbooth case large
9000 37809 3D glasses
9000 37901 EASY view 3D Headset HDMI-
- 7 -
with multi voltage power adapter
Recorder (only in use with
2400 0502 / 2400 0504)
EN
Fig. 3
Fig. 4
2
30
Fig. 5