Renfert EASY view 3D Mode D'emploi page 38

Access via WINDOWS Explorer
⇒ Open WINDOWS Explorer
⇒ Enter the host name as displayed in the address
EN
line�
⇒ Press Enter�
♦ The content of the USB stick is displayed as
folder content�
♦ It is NOT possible to view a preview of the
images�
♦ Images/files can be moved/copied between the
PC and USB stick by dragging and dropping�
Access via Safari
⇒ Open the Safari browser�
⇒ Enter the IP address as displayed in the
address line�
⇒ Enter "Renfert" as the user name for the
authentication prompt; the password field
remains blank�
♦ The files of the USB stick are only displayed in tables/text form.
♦ It is not possible to move the files.
Depending on the network configuration, the EASY view 3D head is assigned a new IP address
after being switched on. If there is no connection, the IP address must be checked.
5.6 Working with 3D
After switching to the 3D display, a 3D image is generated on the monitor�
When working in 3D, the 3D glasses must be worn�
Looking at the 3D image without 3D glasses (for example, over the shoulder of another person) is very
strenuous and not recommended�
When working in 3D mode, it is important that the monitor is aligned correctly.
The monitor should be perpendicular to the viewing direction. Refer to Chapter 4.3.3.
5.7 Split screen
The System Easy view 3D contains the split screen function from version 2�001� This enables an addition-
al image to be inserted on the monitor. This can be an image from a USB flash drive or a screenshot that
has just been taken�
The size and position of the inserted image can be adjusted�
With the split screen function, inserted images are only displayed in 2D.
The current software with Split Screen function can be found in the
Download Section of our web site at www.renfert.com/p915.
Enter the following item number: 24000500�
Select the download category „Product software"�
♦ Open split screen main menu:
⇒ press the right mouse button until the split screen main menu
appears�
Operation and navigation in the split screen menus:
⇒ Roll mouse wheel
♦ Select menu item / sub-menu
⇒ Click left mouse button
♦ Select menu item / sub-menu
⇒ Click right mouse button
♦ returns to the previous menu level
⇒ Click and hold the right mouse button
♦ closes the split screen menu and returns back to normal operation
As long as a split screen menu is open, the system settings (2D / 3D, 15x / 20x zoom, object mode)
cannot be changed.
.
- 12 -
Fig. 15
Fig. 16
Fig. 17