Spare Parts; Technical Specifications; Standard Delivery - Renfert MTplus Mode D'emploi

Masquer les pouces Voir aussi pour MTplus:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
idue! Make sure the work table
is properly seated on the front
cover!
9. Plug the power cord into the wall outlet
(Fig. 7 or 14).
5.5 Switch Cover Replacement
1. Loosen the fastening screws (Fig. 41).
2. Remove the switch cover and replace
it with a new one
(Art. No. 90003-5788).
3. Retighten the fastening screws.
The MTplus may not be operated
with a defective switch cover!

6. Spare Parts

You can find components subject to wear
and the spare parts on the spare part list
in the internet at www.renfert.com/p918.
The components excluded from the
warranty (such as consumables or parts
subject to wear and tear) are marked on
the spare part list.
Serial number and date of manufacturing
are shown on the type plate of the unit.
7. Warranty
Provided the unit is properly used, Ren-
fert warrants all parts of the MTplus for a
period of 3 years. In case of any claims
for warranty original dealers' invoice is
required. Components subject to natural
wear (e.g., trimmer discs) are excluded
from this warranty.
The warranty is voided in case of improp-
er use, failure to observe the operating,
cleaning, maintenance, and connection in-
structions, in case of independent repairs
or repairs by unauthorized personnel, if
spare parts from other manufacturers are
employed, or in case of unusual influences
or influences not in compliance with the
utilization instructions. Warranty service
shall not extend the original warranty.
EN

8. Technical Specifications

Mains voltage:
Power consumption:
220 - 230 V: 1300 W (1,743 hp)
230 - 240 V: 1300 W (1,743 hp)
Water consumption,
max.:
Necessary water pressure:
- min.:
- max.:
Speed:
Connection piece
diameters for external
extraction:
Dimensions
(W x H x D):
Ø Trimmer disc
dimensions:
Weight:
Sound pressure level
accord. to DIN 45635-01-KL3,
measured under full load:
- Lp(A) :
- K:

9. Standard Delivery

1 MTplus
1 Inlet tube
1 Drain tube
1 Tool set
1 Hardware set
1 Marathon trimmer disc, only on
No. 1803-x500
- 6 -
220 - 230 V, 50 / 60 Hz
230 - 240 V, 50 Hz
120 V, 60 Hz
100 V, 50 / 60 Hz
120 V: 1500 W (2,012 hp)
100 V: 1200 W (1,609 hp)
9 l/min. [0.32 cfm]
1 bar [14.5 pis]
5 bar [72.5 psi]
50 Hz: 2850 1/min.
60 Hz: 3400 1/min.
36 mm [1.42 inch]
300 x 320 x 410 mm
[11.8 x 12.6 x 16.2 inch]
234 mm [9.2 inch]
13.5 kg [30 lbs]
74 dB(A)
4 dB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

180300001803050018034000180345001803500018035500

Table des Matières