Model Description - Hatco Flav-R 2-Go F2G Série Manuel D'installation Et D'utilisation

MODEL DESCRIPTION

All Models
Hatco Flav-R 2-Go Locker Systems are designed to hold
® ®
pick-up and delivery orders securely while allowing quick
access. Each unit features magnetically-locked hinged doors,
a 10" (254 mm) touchscreen controller on one or both sides
of the unit, a Power I/O (on/off) switch, LED lighting, and a 6'
(1829 mm) power cord with plug.
Lockers systems can be installed on a countertop, mounted to
the floor, or built into a wall opening. All units are available in
several Designer colors.
The touchscreen controller can be used to input customer orders
manually or used with an outside vendor's POS integration.
NOTE: Refer to the OPTIONS AND ACCESSORIES section of
this manual for all of the available options and accessories.
F2G-3 and F2G-x2 Models
(Countertop Models)
The F2G-3 and F2G-x2 models are designed for countertop
use. These models are 1 or 2 lockers high with 2 or 3 columns.
Countertop models can be ordered as pass-through or single-
sided access units.
• Pass-through models come with locked doors and a
touchscreen controller on the customer side of the unit
and non-locked doors and a touchscreen controller on
the operator side of the unit.
• Single-sided access models come with locked doors
and a touchscreen controller only.
NOTE: The Power I/O (on/off) switch is located next to the
power cord on single-sided access models.
Power Cord
w/Plug
Operator Side Shown
Model F2G-32-A (Pass-Through Model)
Power I/O
Switch
Touchscreen
Controller
4
F2G-x4 Models (Floor Mount Models)
The F2G-x4 models are designed to be installed onto the floor.
These models are 4 lockers high with 2 or 3 columns.
Floor mount models can be ordered as pass-through or single-
sided access units.
• Pass-through models come with locked doors and a
touchscreen controller on the customer side of the unit
and non-locked doors and a touchscreen controller on
the operator side of the unit.
• Single-sided access models come with locked doors
and a touchscreen controller only.
NOTE: The Power I/O (on/off) switch is located next to the
power cord on single-sided access models.
Power I/O
Switch
Touchscreen
Controller
Operator Side
Shown
Model F2G-24-A (Pass-Through Model)
F2GB-xx Models (Built-In Models)
The F2GB-xx models are designed to be installed into a wall
opening. These models are 1 to 3 lockers high with 2 to 5 columns.
Built-In models are pass-through units that come with locked
doors and a touchscreen controller on the customer side and
non-locked doors and a touchscreen controller on the operator
side.
Touchscreen
Controller
Cu omer Side
Shown
Model F2GB-22-A (Pass-Through Model)
English
Power Cord w/Plug
Power Cord w/Plug
Form No. F2GM-0820