Programming Artromot®-S Comfort; Protocol Details - Comfort Model - DJO Global ARTROMOT-S3 Série Mode D'emploi

. Programming
ARTROMOT®-S Comfort
ARTROMOT®-S devices of the Comfort
series o er two more programming levels
for additional functions.
The programming levels are selected in the
same way as on Standard models.
Programming levels 1, 2, 3 and 6 are identi-
cal with programming levels 1 to 4 of the
Standard models.
All special functions are disabled in the
standard models.
The following treatment values, settings
and information can be entered/viewed on
the programming unit (1):
LEVEL :
– Abduction
– Adduction
– Internal rotation
– External rotation
LEVEL :
– Pause
– Therapy timer
– Speed
– New patient
LEVEL :
– Reverse on load - motor A
– Reverse on load - motor B
– Motor A ON/OFF
– Motor B ON/OFF
LEVEL :
– Warm-up protocol
– Isolation program
– Therapy documentation
Abduction/adduction
– Therapy documentation
Internal/external rotation
LEVEL :
– Oscillation
– Stretching in abduction
– Stretching in
internal rotation
– Stretching in
external rotation
LEVEL :
– Transport setting
– Synchronized/
non-synchronized mode
– Total therapy time
– Service menu
. Protocol details –
Comfort model
• To access the programming level you
need, press the MENU key repeatedly.
• The treatment parameters are selected
with the di erent parameter keys.
• To change the treatment values, press
the + / – keys.
• To enable/disable a function, press the
respective parameter key again.
• To save the entered values, press the
STOP key.
All special functions are disabled in the
standard models.
Note!
LEVEL : equivalent to level 1
of the Standard model (see: 5.3)
LEVEL : equivalent to level 2
of the Standard model (see: 5.3)
LEVEL : equivalent to level 3
of the Standard model (see: 5.3)
LEVEL : equivalent to level 4
of the Standard model (see: 5.3)