Milk Dispensing (Where Applicable); General Indications - La Cimbali M100 GT Utilisation Et Installation

19. Milk dispensing (where applicable)

TURBO MILK
The "Turbo Milk" is an automated system for managing
hot milk - only heated or whipped - and whipped cold milk,
which is meant to improve the quality and range of milk-
based beverages.
Scalding hazard! Use the appropriate insulating devices to move the milk dispenser.
1
Insert the tube (M) in the milk container
and position the appropriate container
under the dispenser (9c).
4
Press the selector (13) to start
dispensing. Once the set temperature
is reached, the steam will stop
automatically.
2
9c
M
Use the selector (13) knob to select
the type of frothing and heating of the
milk from the 4 available settings (TM1
÷ TM4).
13
18 EN

GENERAL INDICATIONS

Milk is a delicate biological product and can easily
deteriorate. Heat modi es its structure. Milk must be kept
at a storage temperature no higher than 5°C (41°F) from
the moment the container is opened and throughout its
entire period of use. Our storage appliances are suitable
for this purpose.
NOTE: at the end of the work day (or not more than 24
hours from the time the container is opened), any remaining
milk must be discarded.
At the end of the work day (or not more than 24
hours from the time the container is opened),
any remaining milk must be discarded.
CAUTION: After a long inactivity, the hygienic
norms relevant to milk conservation shall be
followed.
3
13
The type of milk selected is displayed
on the touch screen.