Hot Water Dispensing; Cappuccino Dispensing (Milk Frother Machines) - La Cimbali M39Classic Utilisation Et Installation

The dispensing of hot water is controlled by the economizer
which permits mixing hot water from the boiler with fresh cold
water from the mains and controls its temperature.
With this system, water quality is improved and assures the
best results for the operator.
After having placed a container under the hot water nozzle (8),
press the hot water dispensing key (12).
Hot water will be continuously dispensed until the hot water
key (12) is pressed again.

11.3 Cappuccino dispensing (Milk frother machines)

MILK
Being a biological product, milk is subject to alteration and
heating changes its structure.
Therefore, as soon as a container of milk is opened, it should be
kept at a low temperature to preserve it. Cimbali's "Frigomilk"
unit is especially designed for this purpose.
PREPARATION OF CAPPUCCINO
- Just use the filter-holder that has a single spout.
- Remove the filter-holder from the dispenser unit and remove
all the used coffee grounds; then fill with fresh ground coffee
and press firmly.
- Insert the filter-holder into the dispenser unit and secure
firmly.
- Place a cappuccino cup or other appropriate container under
the spout; with the special spout of the cappuccino-maker (X),
the cappuccino cup or other container must not be moved
between the dispensing of the coffee and milk.
- Press the coffee dispensing button (2) and dispense.
When the desired dose is obtained, press button (2) again
to stop dispensing.
- Turn the milk supply switch (20). Once the desired amount
of milk is obtained, turn the switch (20) to "0" to stop.
CAUTION: After a long inactivity, the hygienic
norms relevant to milk conservation shall be
followed.

11.2 Hot water dispensing

34
English
12
8
2
20
X
English