Heating Milk For Frothy Coffee (Cappuccino) - La Cimbali M39Classic Utilisation Et Installation

Heating milk for frothy coffee (cappuccino)

Use a tall narrow jug and fill it up to about the half-way mark.
Then plunge the steam jet pipe (1) into the milk.
20
Gradually open up the steam tap (20) and heat the milk for a
few seconds.
When the required amount of froth has been made and the
temperature is sufficiently high, stop the flow of steam by
1
turning knob (20) the other way (towards "0").
When the steam jet pipe (1) is no longer required, clean it
thoroughly with a sponge and a clean cloth.
12. Water level control of boiler - Filling the boiler with water through manual
Level control - An automatic water levellever built in series
in all machines, maintains the prestabilised water level inside
the boiler.
Filling the boiler - This function should be used only if the
3
electronic level control devices are not working correctly.
Press the filling button (36), taking care not to exceed the MAX.
level on the boiler water level indicator (3).
NOTE: the MAX level MUST NOT be exceeded.
36
35