Cup-Warmer; Heating Phase - La Cimbali M39Classic Utilisation Et Installation

23
Put a sufficient number of cups on the cup-warmer grid.
While the machines is heating up, hook the filterholders to
the groups.
Heating is completed when the boiler gauge indicator (7)
remains stable in the A area.
The machine is now ready to dispense coffee, steam and hot
water.
To make sure that the dispenser unit and the filter holder
(11) are at similar temperatures, press the START-STOP
push-button (2) and let the machine dispense coffee for a
few seconds. Then press the START-STOP push-button (2)
to stop dispensing.
During the heating phase of the machine it is quite normal that
some steam escapes from the vacuum release valve.
CAUTION: do not put any cloth on the cup-
warmer.

9. Cup-Warmer

The machines have a cup warmer tray (23) for stocking and
22
pre-heating the cups.
Only place cups and glasses used with the coffee machine
on the cup tray. No other objects must be placed on the
tray.
Thoroughly drain the cups before placing them on the tray.
Press the button (22) and check to see that the light turns
on.

10. Heating phase

32
English
CAUTION: do not put any cloth on the cup-warmer.
A
English
7