Heating Phase; Delivery Of The Coffee; Other Hot Beverage - La Cimbali M29 Selectron Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39
During heating, if one of the coffee dispensing switches (16,
17, 18, 19 or 20) is pressed, the machine dispenses a coffee
at the temperature reached at the time.
Heating is completed when the boiler gauge indicator (14)
remains stable in the green area.
The machine is now ready to dispense coffee, steam and hot
water.
To make sure that the dispenser unit and the filter holder (10)
are at similar temperatures, press the START-STOP push-
button (20) and let the machine dispense coffee for a few
seconds. Then press the START-STOP push-button (20) to
stop dispensing.
Remove the filter holder, empty out any coffee grouts and fill
it up with 1 or 2 servings of ground coffee, depending on the
filter holder used.
Press the ground coffee down uniformly in the filter, using the
grinder/doser presser.
Remove any residues of ground coffee from the filter rim.
Fit and tighten the filter holder (10) on the coffee dispenser
unit, positioning the cup (or cups) under the nozzle (or nozzles)
of the filter holder (10).
Heating milk for frothy coffee (cappuccino)
Use a tall narrow jug and fill it up to about the half-way mark.
Then plunge the steam jet pipe (6) into the milk.
Gradually open up the steam tap (7) and heat the milk for a
few seconds.
When the required amount of froth has been made and the
temperature is sufficiently high, stop the flow of steam by
turning knob (7) the other way (towards "0").
When the steam jet pipe (6) is no longer required, clean it
thoroughly with a sponge and a clean cloth.
Dispensing hot water
Position a container under the hot water dispensing pipe (8)
and press the hot water dispensing push button (9a or 9b).
Dispensing starts and then stops automatically.
Press the STOP push button (9c) for continuous dispensing.
Dispensing, whether for dosed servings or in the continuous
dispensing mode, can be interrupted at any time by pressing
the STOP push button (9c).

10. Heating phase

11. Delivery of the coffee

Press the coffee dispensing push button (16, 17, 18 or 19) for
the required serving; the machine will stop automatically.
Press the START-STOP push button (20) for continuous
dispensing.
Dispensing, whether for dosed servings or in the continuous
dispensing mode, can be interrupted at any time by pressing
the START-STOP push button (20).

12. Other hot beverage

7
6
30
16
17
20 18
19
9a
8
14
10
7
6
9c
9b

Publicité

Table des Matières
loading

Table des Matières