Preparation For Installing The Unit; Environment; Environmental Conditions - Ingeteam INGEREV FUSION Série Manuel D'installation Et Usage

Ingeteam

5. Preparation for installing the unit

When deciding the location of the unit and planning your installation, you must follow a set of guidelines based on
the specifications of the unit.

5.1. Environment

• These units can be installed indoors and outdoors.
• Situate the units in a place that is accessible for installation and maintenance work, which permits them
to be operated and the indicator LEDs to be read.
• Avoid corrosive environments that may affect the proper operation of the unit.
• Do not leave objects leaning on the unit or against its sides.
• Keep the following minimum distances free of obstacles:
c m
3 0
3 0 c m
INGEREV FUSION Street

5.2. Environmental conditions

CAUTION
Ingeteam does not guarantee the proper operation of the equipment if the operation conditions for which it has
been designed are not fulfilled.
Avoid corrosive environments that may affect its proper operation. Do not install the unit in areas classified as
ATEX.
Environmental operating conditions indicated in section "2.3. Specification table" must be taken into account
when choosing the location of the unit.
20
3 0 c m
Preparation for installing the unit
3 0 c m
c m
3 0
INGEREV FUSION Wall
ABW2011IQM01_D - Installation and Operation Manual
3 0 c m