Unit Description; Overview; Models - Ingeteam INGEREV FUSION Série Manuel D'installation Et Usage

Unit description

2. Unit description

2.1. Overview

The INGEREV FUSION chargers are the alternating current model designed to meet all the requirements of electric
vehicle charging in public and private settings.
Allows simultaneous charging of two vehicles, and with its different power supply configurations it is compatible
with mode 3 as well as with modes 1 and 2.
They have been designed for use indoors and outdoors and may be installed in locations with unrestricted access.

2.2. Models

The INGEREV FUSION range is available in two versions: FUSION Street for installing on the ground, and FUSION
Wall for installing on the wall. These versions are available in the following variants:
Grid
Power meter
MID wattmeter
Residual current device Type A manual
Residual current device Type A
resettable
Overcurrent protection (Curve C)
ABW2011IQM01_D - Installation and Operation Manual
Variants of models INGEREV FUSION Street / Wall
FS1MW / FS1AW /
FW1MW FW1AW
Single phase Single phase
FS3NN / FS3MW /
FW3NN FW3MW
Three phase Three phase
Ingeteam
EN
ES
FR
IT
PT
FS3AW /
FW3AW
Three phase
11