Installing Your Hob In All Simplicity; Fitting Recommendations - De Dietrich DTE410 Serie Guide D'utilisation

All manuals and user guides at all-guides.com
99632082_ML_A.qxd 11/03/04

Installing your hob in all simplicity

F
itting recommendations
Model
Standard cut-
out
Recommended
Cut-out
Outside
dimensions above
the work surface
Outside
dimensions below
the work surface.
This appliance should be installed by
a qualified technician / installer.
Prior to installation, ensure that the
local distribution conditions (nature
of the gas and gas pressure) and the
adjustment conditions of the
appliance are compatible.
These hobs are designed to be used by
private individuals in their homes.
The adjustment conditions are stated on
a label in the wallet and also on the
packaging.
Since this appliance is not connected to a
combustion products evacuation device, it
must be installed in accordance with
current installation regulations and used
in a well-ventilated place. Particular
attention should be given to the relevant
requirements regarding ventilation.
On this subject, combustion can take
place only if oxygen from the air is
present, so this air must be constantly
Keep this guide near your appliance.
24
14:41 Page 24
Depth
Width
60 cm 60 cm
56 cm 49 cm
56 cm 48 cm
58 cm 52,2cm
55,4 cm 47,4 cm
renewed and the combustion products
must be evacuated (a minimum air input
of 2 m3/hour per kw of gas energy is
required).
These hobs have type X protection (in
accordance with standard EN 60.335.2.6)
against overheating of cupboards and
Class 3 for installation itself (in
accordance with standard EN 30.1.1).
Identity plate:
Européenne d 'électroménager
3
Height
60 cm
Depending on the unit
Depending on the unit
4,9 cm
3,5 cm
1 Type of appliance
2 Serial number
3 Voltage to be used
4 Power required
1 2
TYPE N
MADE IN FRANCE
4