Tips For Flush Mounting; Installing Your Hob Abovea Drawer, A Cupboard Or An Oven - De Dietrich DTI1102VDE Guide D'installation Et D'utilisation

2 2 / / INSTALLING YOUR APPLIANCE
EN

• TIPS FOR FLUSH MOUNTING

Underside view of
the housing
Fig. 01
A Fixing holes
Mounting brackets
Fig. 02
Fig. 03
Min. 0.5 cm gap along the whole
width of the hob.
A A
A A
Cabinet
Screw
1
— If you wish, you can immobilise the hob
using the four mounting brackets delivered
with a screw (Fig. 02) to attach them to the
four corners of the housing. You must use the
holes provided for this purpose, according
to the diagram above (Fig. 01) .
— Tighten the screws until the fixing bracket
starts to pull out of shape.
Do not use a power screwdriver.
INSTALLING YOUR HOB ABOVE
•
A DRAWER, A CUPBOARD OR
AN OVEN
•
Above an empty cabinet or a drawer
(Fig. 03) .
Leave a minimum ventilation space of 8 cm
behind the cabinet, and a 0.5 cm gap along
the whole width of the cabinet.
1
3
36
2
4 cm mini
8 cm mini