Description Of Control Panel; Switching On; Turning Off; Adjusting The Power Level - De Dietrich DTI1102VDE Guide D'installation Et D'utilisation

3 3 / / USING YOUR APPLIANCE
• THE CONTROLS
A
On/off touch controls
B
Power level touch controls
C
Timer touch controls
POWERING ON
•
Press the touch control for the zone you
want to use.
A flashing 0 display and a beep indicates that
the zone is on. You can now set the power
you require.
If you do not select a power level, the cooking
zone will automatically switch off.
• OFF
Press the touch control for the zone used
or power touch control until 0 is displayed.
•

ADJUSTING THE POWER LEVEL

Press or
power level between 1 and
power = ).
When the appliance is switched on, you can
move directly to maximum power by pressing
touch control .
Tip
When using one cooking zone at
maximum power, the other cooking zone
will be automatically limited, as shown on
the display.
A B C
touch control to adjust your
(maximum
SETTING THE TIMER
•
A timer is available for all the cooking zones
but can only be used for one at a time.
With a series of presses of the
control you can select the cooking zone to
which you want the timer to apply.
The timer can only be used for a plate that is
already in use.
•
To use the timer:
— Switch on the cooking zone and adjust
the power level.
— Position the rotating symbol on this
cooking zone.
— Adjust the time by pressing
dot will light up on the display to confirm your
operation.
The timer starts counting only if the cooking
zone is covered with an item of cookware.
When cooking is finished the zone switches
off, the timer indicates 0, and you are notified
by a beeping sound.
— Press or
to stop the beep.
•
To change the timer settings:
— Press the
•
To stop the timer:
— Press the
•
To change the cooking plate to which the
timer is applied:
— Stop the current timer.
— By pressing the
successively, assign a new operating cooking
zone.
49
or
touch control of the timer
or timer touch controls.
touch control.
touch control
EN
touch
. A