3 3 / / USING YOUR APPLIANCE
EN
•
LIGHTING THE GAS BURNERS
Each burner is supplied by a tap which can be
opened by pressing it and turning it in in a
counter-clockwise direction.
The "
O
" point corresponds to closing the tap.
— Select the desired burner by referring to the
symbols located near the knobs (e.g.
front right burner).
The control knobs on your hob have a built-in
ignition system.
— To light a burner, press on the knob and
turn it in a counter-clockwise direction
the maximum setting
— Keep the knob pressed in, which triggers a
series of sparks, until the burner lights.
The settings for more moderate flame
intensities are between the
the
symbol.
Tip
When a knob becomes difficult to turn,
do not force it. Call your installer for an
emergency visit.
If a flame is accidentally extinguished, re-
light it as normal following the instructions
above.
to
.
symbol and
Fig. 01
46