Transport Lug; Footswitch; Switch Cabinet; Engine Compartment With Oil Tank - Honsel S-416 Plus Manuel D'utilisation

The construction and the appear-
ance of the machine may vary
depending on the configuration of
the machine.
No . Designation
1 Fixed stop system (optional, not possible
with machine S-416 Plus), see chapter
2.4.6
2 Transport lug, see chapter 2.4.1
3 Part counter (optional, not possible with
machine S-416 Plus), see chapter 2.4.7
4 Warning sign, see chapter 1.5
5 Switch cabinet, see chapter 2.4.3
6 Indicators and operating elements, see
chapter 2.5
7 Containers (optional), see chapter 2.4.8
8 Engine cover, see chapter 2.4.4
9 Down footswitch, see chapter 2.4.2
10 Up footswitch, see chapter 2.4.2
11 Lower tool holder, see chapter 2.4.5
12 Automatic feed system (optional, not
possible with machine S-416 Plus), see
chapter 2.4.9
13 Upper tool holder, see chapter 2.4.5
14 Tool protection system (optional), see
chapter 2.4.10

2 .4 .1 Transport lug

The transport lug is used to lift the machine during
transport.

2 .4 .2 Footswitch

The footswitches move the upper tool holder.

2 .4 .3 Switch cabinet

Danger
Voltage-regulated devices
Death or serious injury caused by
electrical shock
• Work on the electric system
must be performed only by
qualified electricians.
• Keep system closed.
Figure 3 Switch cabinet
No . Designation
1 Release Lock
2 Main Switch

2 .4 .4 Engine compartment with oil tank

Behind the right engine cover is the hydraulic oil
tank.
1
2
3
4
5
Figure 4 Open engine compartment
No . Designation
1 Filter unit
2 Filler pipe hydraulic oil
3 Hydraulic oil tank
4 Fill level indicator
5 Drain screw
1
2
1
English | 37