Control Direction Tests Continued - Horizon Hobby E-flite Bind-N-Fly UMX FPV RADIAN Mode D'emploi

Control Direction Tests
®
AS3X Control
Direction Test
This test ensures that the
®
AS3X control system is
functioning properly.
1. Advance the throttle
to 25% to activate the
AS3X system.
2. Fully lower the
throttle.
3. Move the entire
aircraft as shown and
ensure the control
surfaces move in the
direction indicated
in the graphic. If
the control surfaces
do not respond as
shown, do not fly the
aircraft. Refer to the
receiver manual for
more information.
Once the AS3X system is
active, control surfaces
may move rapidly.
This is normal. AS3X is
active until the battery is
disconnected.
Continued
Aircraft
Movement
AS3X Reaction
EN
9