Setting The Time - Dometic CA2500 Notice D'utilisation

Masquer les pouces Voir aussi pour CA2500:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
_BA_CA2500.book Seite 31 Dienstag, 9. Februar 2010 3:50 15
All manuals and user guides at all-guides.com
Dometic CA2500
8.5
Switching off the roof air conditioner
Switching off the roof air conditioner with the remote control
➤ Press the Off button to switch off the device.
Switching off the roof air conditioner with the control panel
➤ Press the ON/OFF button to switch off the device.
8.6

Setting the time

The remote control needs the current time in order to program the timer.
The time is indicated on the display of the remote control.
Perform the following steps to set the time:
Note
I
The remote control returns to its initial mode if no key is pressed on
the remote control for ten seconds while setting the time.
➤ Press the Select key to go to the mode used to set the time.
✓ The CLOCK SET message flashes on the display of the remote control.
➤ Select the hour of the current time using the + or – key.
➤ Press the Select key.
➤ Select the minute of the current time using the + or – key.
➤ Press the On/Send key to send the values on the display to the device.
Operating the roof air conditioner
31

Publicité

Table des Matières
loading

Table des Matières