Setting The Temperature; Setting The Mode - Dometic COOLAIR RTX1000 Notice D'utilisation

Using the parking cooler
➤ Set the timer (chapter "Setting the timer" on page 19), if you want the parking
cooler to switch off automatically after the required time.
7.7

Setting the temperature

I
NOTE
Depending on the set unit for the temperature, the temperature is
changed in steps of either 1 °C or 2 °F.
Control panel
➤ Press the
button until the
➤ Press the
or
➤ Press the
button to save the value.
Remote control
➤ Press the
+ button to increase the temperature.
➤ Press the
– button to decrease the temperature.
➤ To save the value don't press any button for more than 5 seconds.
7.8

Setting the mode

Control panel
➤ Press the
button until the
➤ Press the
or
To set the MANUAL mode see below.
➤ Press the
button to start the selected mode.
If you like to set the fan speed manually (MANUAL mode):
➤ Press the
button until the
➤ Press the
or
MANUAL mode is started.
➤ Press the
button to save the value.
18
symbol is displayed.
button to set the desired temperature.
symbol is displayed.
button to set the AUTO, ECO or BOOST mode.
symbol is displayed.
button to set the desired fan speed. At the same time the
RTX1000/2000, SPX1200
EN