Settings Menu - AEG DAB+ 4158 Mode D'emploi

All manuals and user guides at all-guides.com
• The program type (PTY) of the station is displayed (e.g.
Pop music, news etc.). If no PTY is received, [No PTY]
appears on the display.
• Display of the radio frequency.
• Audio mode is indicated. (Stereo or Mono)
• Display the time.
• Display the date.
Scan DAB stations
Digital Audio Broadcasting (DAB) is a digital broad casing
standard for terrestrial reception of digital radio. A list of radio
stations which can be received in Germany is available on the
Internet at www.digitalradio.de.
NOTE:
In Germany approx. 70 % of the country' s area is covered by
digital radio broadcasts (as of Nov. 2011). In the individual
areas however, coverage and provision vary greatly. If the
DAB stations in your region cannot be received or only with
interferences depending on location, in this case you can
switch to the FM band to receive this station. This is only
possible however if these stations are broadcast via VHF.
Find out more on the internet site of the radio station.
1. Press the MODE button repeatedly until "DAB" appears
on the display.
2. Press the SCAN button. The device then searches for the
radio stations which can be received.
3. You can select the next or the previous station by using
the / buttons.
4. If the reception is too weak and the received station
"motorboats", try to improve the reception by changing
the position of the antenna.
NOTE:
To manually set a DAB frequency, proceed as described in
the "Settings menu" sections.
Display Additional DAB Information
In DAB mode, you can display the following additional
information if broadcast by the radio station. To do so, press
the MENU / INFO / SNOOZE button.
The DLS text is shown on the display by default.
• DLS: Short for Dynamic Label Segment. This involves
complementary data. This content may be e.g. informa-
tion about the station or the music title and artist being
played. If information on the track title is transmitted
by the station, you can display this information with the
MENU / INFO / SNOOZE button.
• Displays the received signal strength.
• This indicates the station category (e.g. Pop-Music, News
etc.).
• Displays the name of the station group (e.g. DR
Deutschland).
• Frequency of the current radio station.
DAB+4158_IM
• The "SIGNAL ERROR" display shows the signal quality.
The lower the adjacent figure, the better the quality.
• Displays the digital Audio Bit Rate / DAB or DAB+.
• Display the time.
• Display the date.
Save Station
1. After having found the desired station, press the PRESET
button. The first preset location appears on the display. In
case of still empty storage space, the notification "Preset
1 empty" will appear.
2. For choosing the memory position, press /
3. Press the / ENTER button to store. The display
shows "Station 1 saved" for a short time.
Select a Preset Station
1. Press the PRESET button.
2. For choosing the memory position, press /
3. Confirm your selection with the
button.

Settings menu

Numerous settings are made via the Settings menu (see
page 6).
In the Settings menu you can find the main menu and the
related submenus with the individual options.
To enter the menu, keep the MENU / INFO / SNOOZE
button pressed in DAB, FM, Bluetooth or AUX mode.
• Use the / buttons to navigate in the menu.
• Use the / ENTER button to select a submenu,
or confirm a setting.
• Press the MENU / INFO / SNOOZE button to change to
the previous submenu.
• To leave the menu, keep the MENU / INFO / SNOOZE
button pressed.
NOTE:
• If you do not press any button within 30 seconds, the
menu is hidden.
• The currently set option is highlighted by " ".
The menu SYSTEM is the same in all operation modes. The
DAB and the FM mode have an additional own menu. The
individual menus are explained in the following.
DAB Menu
The DAB menu is divided into menus:
• Full scan: Starts the station scan. The DAB frequency
band is scanned for stations.
• Manual tune: To do so you need to know the station
frequency. This can be found on the internet site of the
broadcasting service. Select the individual frequencies
with the / buttons. Start the manual scan by pressing
the / ENTER button. The station group will
appear after a short time on the display. Press the
English
57
buttons.
buttons.
/ ENTER
02.09.16