Cleaning And Maintenance - Beurer HS 100 Mode D'emploi

Note
The device has an automatic switch-off function and switches
off automatically after 30 minutes for safety reasons�
Note
The device has a button lock so that the device does not switch
off if you press the ON/OFF button
use�
1� To activate the button lock, press and hold the button lock
button
5
2� To deactivate the button lock, press and hold the button
lock button
shows �

5. CLEANING AND MAINTENANCE

1� Risk of electric shock! Always pull the mains plug out of the
socket before cleaning the device� Make sure that the device
has cooled down completely�
2� Only clean the housing of the device and the coated hot plates
with a soft cloth dampened with warm water� Ensure that
1
no water gets inside the device�
3� Protect the device from dust, dirt and humidity�
4� Risk of fire! Do not clean the device with highly flammable
liquids�
5� Do not clean the device in the dishwasher� Do not use any
aggressive, caustic, abrasive or corrosive cleaning products
or hard brushes�
for 2 seconds� The LED display
for 2 seconds� The LED display
5
unintentionally during
4
18
shows �
3
no longer
3