After Use; Cleaning And Maintaining The Device; Technical Specifications - Beurer HT 60 Mode D'emploi

After use

> Place the sliding switch [5] on the device in position 0.
> Place the multi-functional styler with the support stand [13] on a stable, horizontal and non-flammable
surface to cool down, or hold the multi-functional styler in your hand.
> After each use, pull the mains plug out of the socket.
> Do not wind the mains cable [9] around the device!
> Store the device in a dry place out of the reach of children.
> The device can be hung on a hook using the hanging eyelet [8].

7. Cleaning and maintaining the device

Cleaning
Warning
• Always pull the mains plug out of the socket before cleaning the device. Risk of electric shock!
• Ensure that no water gets inside the device! Risk of electric shock!
• Do not clean the device with highly flammable liquids! Risk of fire!
Notes
• Your device is maintenance-free.
• Protect the device from dust, dirt and humidity.
• Do not clean the device in the dishwasher.
• Do not use any aggressive, caustic, abrasive, or corrosive cleaning products or hard brushes.
• The device may be cleaned with a soft cloth dampened with warm water.
• Dry the device and attachments with care after cleaning!

8. Technical specifications

Weight
Power supply
Power consumption
Temperature range
Safety class
Ambient conditions
Allowable temperature range
Subject to technical modifications.
The unit carries the CE mark and complies with the following EU directives:
• 2006/95/EC the Low Voltage Directive
• 2004/108/EC the EMC Directive
Approx. 340 g
220 - 240 V ~, 50/60 Hz
25 W
125 to 180 °C
II
Only approved for indoor use
-10 to +40 °C
20